Login   Tu sei in: tecnopolo

RISULTATI di RICERCA

RISULTATI

>Lista di tutti i risultati
Evaluation of water stress of selected cases from water re-use or saving scenario’s tested in SP5
Abstract The project for sustainable water use in chemical, paper, textile and food industries
Descrizione This report is a result of the project AquaFit4Use, a large-scale European research project co-financed by the 7th framework programme of the European Union on water treatment technologies and processes.
Aquafit4Use project aims at developing and implementing new, reliable, cost-effective technologies, tools and methods for water supply, use and discharge in the main water consuming industries in order to significantly reduce water use. One of the objectives of these developments is the mitigation of environmental impacts. To achieve the sustainability objective of this project, it is essential to check whether new technologies and reuse options allows reducing environmental impacts of industrial water treatment.
This study aims at assessing environmental impacts of water treatment solutions. Two levels of scales are investigated. First, the effect of water treatment processes on the actual
toxicity of effluent is evaluated with the Whole Effluent Assessment (WEA) methodology.
Then, a more holistic and macro scale assessment is performed in order to compare the water treatment options planned in different factories (considering different environmental impacts: water pollution but also carbon footprint or impact on human health, considering the whole life cycle of water treatment processes). Methodologies used for this macro-scale assessment are Life Cycle Assessment (LCA) and water footprint.
Regarding effluents toxicity assessment, the substance by-substance approach presents shortcomings (limited number of substances analyzed, combined effects of substances not
considered, etc.). For this reason, WEA is recognized as the most accurate approach for effluent toxicity assessment. WEA is applied to three case studies: chemistry (Pertsorp), textile (Tekstina) and paper (Hamburger Rieger). In all three sectors, WEA shows that the
evaluated treatment sequences typically resulted in a reduction in overall toxicity. In the chemical sector, the total toxicity of the conventional activated sludge effluent sample is already quite low and it is thus difficult to quantify toxicity reduction in comparison with other tested technologies in the treatment train. In the textile sector, particularly the MBR treatment results in a strong toxicity reduction, while AOP treatment has an opposite effect.
Contrary to the results for the textile sector, anaerobic treatment has a major positive effect on wastewater toxicity in the paper sector.
LCA and water footprint are applied to three case studies: food (CHS), textile (Tekstina) and paper (Hamburger Rieger). Results show that implementation of reuse generally leads to a reduction of the water footprint, but on the other hand to an increase of other environmental
impacts (carbon footprint, impacts on human health, etc.) because of additional energy and chemicals consumption and sludge production. In order to mitigate environmental impacts of water treatment processes, it would be more efficient to reduce energy and chemical consumptions of processes, or to valorize sludge. Ensuring that the water finally discharged into the environment reaches an acceptable quality, is also essential regarding environmental footprint. Results also allow reminding that reducing the volume of water abstracted makes sense in areas under water stress. Generally, water reuse increases
indirect water consumption due to additional energy and chemicals production. These indirect water consumptions might be located in areas facing higher water stress than the place where reuse is implemented.
Finally, this study demonstrates the applicability and the usefulness of these recent environmental assessment methodologies. Both could help decision makers to betterunderstand implication of water treatment system improvements in term of environmental impacts mitigation, at a local level (through WEA) and global level (LCA and water footprint).
Particularly, WEA and LCA / water footprint should be considered as complementary tools.
Although WEA demonstrates the usefulness of water treatment solutions for toxicity reduction, it is essential to consider these water treatment solutions improvements in a
broader context of environmental impacts through LCA. On the other hand, LCA and water footprint present clear limitations for effluent toxicity assessment that could be addressed through WEA. Links between these tools should be investigated in the future.
TRL - technology readiness level 5 Prototipo in grande scala o scala reale.
Link1 http://www.aquafit4use.eu/downloads/
Laboratorio TIGRI
Partner ENEA
Topic di ricerca 2.5.2 Trattamento reflui industriali
Risultato LISEA Falso
Risultato Tecnopolo Falso
Topic di ricerca collegati
Code Topic Descrizione ID
2.5.2 Trattamento reflui industriali 41





 

La rete regionale

 


Clusters

Piattaforme

POR FESR

logo rete

logo piattaforma

logo piattaforma

logo piattaforma

logo piattaforma

logo piattaforma

logo piattaforma
Piattaforma Agroalimentare

logo piattaforma
Piattaforma ENA

logo piattaforma
Piattaforma ICT e DESIGN


logo piattaforma
Piattaforma MECCANICA e MATERIALI


Condividi questa pagina con

LinkedIN share Facebook share condividi